Bachelor of Applied Science (Marine Engineering)

Domestic students:

We encourage you to apply for the courses you most want to study. If you are not eligible to enter your chosen course right now, the University’s admissions team will work with you to find the best pathway option.

Enquire online for more advice on the application process and the available pathways to enrol and study at the University of Tasmania.

Schools Recommendation Program

Australian year 12 students can apply for this course via our Schools Recommendation Program (SRP). Rather than an ATAR, your application is based on a recommendation by your school teachers. This can factor in your year 11 results, an assessment of your capabilities, and other considerations.

Through the SRP, you can receive and accept an offer prior to completing year 12. You will still need to finish your year 12 studies – including any exams – to commence your studies. In addition, this course requires you to pass specific pre-requisite subjects in Year 12 (or equivalent), see below for details.

If you don’t receive an offer for this course through the Schools Recommendation Program, you will be re-assessed for a higher preference offer once your ATAR is released.

Domestic applicants who recently completed secondary education

Applicants are ranked by ATAR and offers are made based on the number of places available. We anticipate that the lowest ATAR that will receive an offer for this course in 2027 will be 65.

Applicants who have recently completed senior secondary studies but have not received an ATAR may still be eligible for admission. We will consider your subject results on a case-by-case basis when we assess your application.

Domestic applicants with higher education study

To be eligible for an offer, applicants must have:

• Partially completed an undergraduate course at Diploma level or higher (or equivalent). Applicants must have completed at least two units of study (equivalent to 25 University of Tasmania credit points). If an applicant has failed any units, the application may be subject to further review before an offer is made; O

• Completed the University of Tasmania University Preparation Program (or an equivalent qualification offered by an Australian university).

Domestic applicants with VET / TAFE study

To be eligible for an offer, applicants must have completed a Certificate IV (or equivalent) in any discipline.

Domestic applicants with work and life experience

This course does not admit students on the basis of work or life experience.

Please enquire online for advice on pathways, or alternative course options.

Subject Pre-requisites

These prerequisites apply to students from all educational backgrounds.

To be an eligible for an offer, you must have completed studies or have experience equivalent to a satisfactory achievement in the following Tasmanian Senior Secondary subjects:

• General Mathematics (MTG315123); and

• Chemistry (CHM415115) or Physics (PHY415115) or Physical Sciences (PSC315118) and

• Australian Year 10 pass in English (or equivalent) or higher

You can enquire online for information on interstate and international equivalents to the Tasmanian senior secondary subject above. If you need assistance to meet the prerequisites, we offer foundation units that you can complete before you start your course.

SPECIAL CONSIDERATION

We believe university education should be an option for everyone, no matter your background. If your ability to access or participate in education has been affected by circumstances beyond your control, you can apply for special consideration as part of your application. We will consider a range of factors, including economic hardship, a serious medical condition, or disability.

We can only approve applications for special consideration if we are confident that you have the necessary skills and knowledge to succeed in your studies. If your application is not approved, the University admissions team will work with you to find the best alternative pathway to your chosen course. Special consideration is not available for international applicants.

COURSE PARTICIPATION REQUIREMENTS

This course includes compulsory Work Integrated Learning (professional experience placements). In order to participate in placements, all students must:

• Complete a Safe to Practice Agreement declaring they have the medical, physical or psychological capacity to safely participate in professional experience practice.

International students:

English Language Requirements

This degree requires an IELTS (Academic) of 6.0, with no individual band less than 5.5, or a PTE Academic score of 50, with no score lower than 42 or equivalent.

For students who do not meet the English Language Requirement through citizenship or prior studies in English in an approved country, evidence of an approved English language test completed within the last 2 years must be provided.

See the English Language Requirements page for more information.

General Entry Requirements

Admission to undergraduate courses at the University of Tasmania requires the completion of qualifications equivalent to a year 12 education in Australia.

Please review the equivalent undergraduate entry requirements to see the minimum requirement relevant to your country. The ATAR information for this course is located in the “For Domestic Students” section of the entry requirements on this page.

You can also meet the General Entry Requirement for this course with the following qualifications or prior studies:

• Completion of an equivalent AQF Certificate IV or above

• Complete or incomplete (minimum 25 credit points) of previous tertiary study at Diploma level or higher

Course Specific Requirements

These prerequisites apply to students from all educational backgrounds.

To be an eligible for an offer, you must have completed studies or have experience equivalent to a satisfactory achievement in the following Tasmanian Senior Secondary subjects:

• General Mathematics (MTG315123); and

• Chemistry (CHM415115) or Physics (PHY415115) or Physical Sciences (PSC315118) and

• Australian Year 10 pass in English (or equivalent) or higher

You can enquire online for information on interstate and international equivalents to the Tasmanian senior secondary subject above. If you need assistance to meet the prerequisites, we offer foundation units that you can complete before you start your course.

COURSE PARTICIPATION REQUIREMENTS

This course includes compulsory Work Integrated Learning (professional experience placements). In order to participate in placements, all students must:

• Complete a Safe to Practice Agreement declaring they have the medical, physical or psychological capacity to safely participate in professional experience practice.

Alternative entry pathways:

If you meet the minimum ATAR but haven't completed the required pre-requisite unit(s), we offer foundation units to help you bridge the gap. Many run in spring and summer school so you can meet a prerequisite and not delay the start of your Bachelor level studies. HECS scholarships may also be available for domestic students.

• Refer to Foundation Units to find out more.

If you do not meet the minimum ATAR you should consider enrolment in the Diploma of University Studies (Science Specialisation), which includes the mathematics and chemistry foundation units, as a pathway to this degree:

• Diploma of University Studies

If you do not meet the University General Entry Requirements, you should consider enrolment in the Diploma of University Studies (Science Specialisation) or the University Preparation Program.

• Diploma of University Studies

• University Preparation Program

In all cases, contact us to discuss an option best suited to your needs. Engineer Watchkeeper Trainee Engineer. Holds a workshop skills equivalent qualification. There are 11 relevant trades specified or another approved qualification that includes workshop skills as specified with STCW Code Table A-III/1 column 1

Engineering Experience Training (for a person with a unrestricted State/Territory issued Engineer Class 3 or Engineer Class 3 NC) as determined by the training organisation taking into account any relevant education, skills or practical experience as specified with STCW Code Table A-III/1column 1Advice from AMSA may be sought to establish whether your qualification qualifies for this entry pathway. AMSA's response can then be forwarded as part of your application. Class 2/Class 1 Engineer Australian Engineer Watchkeeper Certificate of Competency (or equivalent)

OR

Engineer Class 3 - refer to AMSA Marine Order 72 Conversion Pathway Engineer Class 1

OR

AMC's 3 year J2W Advanced Diploma (Marine Engineering) with Certificate of Competency (CoC)

Note: must have studied up to STCW Management level prior to commencement of the conversion pathway

OR

Western Australia’s South Metropolitan TAFE (SM TAFE) Advanced Diploma of Maritime Operations to Bachelor of Applied Science (Marine Engineering)

This conversion pathway provides an opportunity for Australian and International Ship Officers to convert their existing professional and academic qualifications to a Bachelor of Applied Science (Marine Engineering).

To be eligible students must have completed: STCW Management level (Chief Engineer Class 1/ STCW A-III/2) studies; and MAR60215 Advanced Diploma of Maritime Operations (Marine Engineering Class 1). For this pathway eligible students will need to complete six units as consisting of two compulsory units and four elective units.

Employment opportunities for seafarers are growing across a range of industries, with demand for maritime professionals projected to increase by a further 2.16% by 2028. Industry Skills Australia reports indicate that adverts for Marine Transport Professional jobs have tripled since 2020.

AMC’s Bachelor of Applied Science (Marine Engineering) is the recognised pathway to becoming an AMSA Certified Class 1 and 2 Marine Engineer. Upon graduating from this degree, you will be competent with advanced industry knowledge and a sought-after skill set which will prove to be advantageous as you seek a career at sea.

• Governmental or intergovernmental regulators and organisations such as AMSA, EMSA (European Maritime Safety Agency), IMO (International Maritime Organization)
• Senior position in a shipyard, technical manager in a shipping company
• Marine superintendent or safety manager in a shipping company
• Product, R&D, sales and service managers in companies manufacturing marine engines and equipment
• Surveyor in a Classification Society
• Marine Surveyor with a Port State Control authority such as AMSA
• Work in Marine insurance companies
• Maritime Education and Training, research and teaching positions