Course Overview

About This Course

This is a trade qualification for carpenters in residential and commercial workplaces. It includes setting out, manufacturing, constructing, assembling, installing and repairing products made using timber and non-timber materials. Occupational titles may include: Carpenter – Commercial Carpenter – Formwork Carpenter – Residential State and territory jurisdictions may have different licensing, legislative, regulatory or certification requirements. Relevant state and territory regulatory authorities should be consulted to confirm those requirements. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. This qualification is suitable for an Australian apprenticeship pathway.

Where You Can Study

Available Locations

Sydney

George Brown College - Level 5, 191-199 Thomas St, Haymarket, NSW 2000

Open in Maps ↗

Eligibility

Entry Requirements

General Requirements

UNDER 18 Although there are no pre-requisites for this qualification, students at George Brown College must meet the following entry requirements to obtain admission in this training product: Have completed an Australian School level year 9, or equivalent Obtain a minimum IELTS 5.5 or equivalent. For exceptions, refer to our English Language Requirements Policy on our website. Be 16 years of age or over Have successfully completed the Pre-Training Review ABOVE 18 Although there are no pre-requisites for this qualification, students at George Brown College must meet the following entry requirements to obtain admission in this training product: Have completed an Australian School level Year 9, or equivalent or be a mature student Age of 18 years or over Obtain a minimum IELTS 5.5 or equivalent. For exceptions, refer to our English Language Requirements Policy on our website. Have successfully completed the Pre-Training Review These entry requirements will be confirmed through information collected on the enrolment form and during the pre-enrolment interview.

Career & Study Pathways

Where this takes you

Career Opportunities

Graduates of the Certificate III in Carpentry typically pursue roles as carpenters in both residential and commercial settings. They may work in various capacities, including formwork and general carpentry, focusing on the construction, assembly, and repair of timber and non-timber products. This qualification prepares them for diverse opportunities within the construction industry, adhering to relevant safety and regulatory standards.

Quality & Recognition

Accreditation & Migration

Academic Regulator

ASQA

Professional Body

State/Territory Trade Licensing Authority

Accreditation Status

Accredited

Skills Assessor

TRA (Trades Recognition Australia)

Course Content

Units of Competency

All Units1 units

CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry CPCWHS3001 Identify construction work hazards and select risk control strategies CPCCOM1012 Work effectively and sustainably in the construction industry CPCCOM1014 Conduct workplace communication CPCCOM1015 Carry out measurements and calculations CPCCOM3001 Perform construction calculations to determine carpentry material requirements CPCCCA3025* Read and interpret plans, specifications and drawings for carpentry work CPCCCA2002* Use carpentry tools and equipment CPCCCA2011* Handle carpentry materials CPCCCM2008* Erect and dismantle restricted height scaffolding CPCCCO2013* Carry out concreting to simple forms CPCCCA3001* Carry out general demolition of minor building structure CPCCCA3002* Carry out setting out CPCCCM2006 Apply basic levelling procedures CPCCOM3006 Carry out levelling operations CPCCCA3003* Install flooring systems CPCCCA3004* Construct and erect wall frames CPCCCA3005* Construct ceiling frames CPCCCA3006* Erect roof trusses CPCCCA3007* Construct pitched roofs CPCCCA3008* Construct eaves CPCCCA3028 Erect and dismantle formwork for footings and slabs on ground CPCCCA3010* Install windows and doors CPCCCA3024* Install lining, panelling and moulding CPCCCM2012* Work safely at heights CPCCCA3016* Construct, assemble and install timber external stairs CPCCCA3017* Install exterior cladding CPCCOM1013 Plan and Organise Work CPCCCM3005 Calculate costs of Construction Work CPCCCM3001 Operate Elevated Work Platforms Upto 11 Meters CPCCCM2002 Carry out Hand Excavation CPCCCA3014 Construct and Install Bulkheads CPCCCA3012 Frame and Fit Wet Area Fixtures CPCCCA3018 Construct, erect and dismantle Formwork for Stairs and Ramps *the unit has pre-requisites

Common Questions

Frequently Asked Questions

What is the total cost of the Certificate III in Carpentry?

The estimated total course cost is AU$46,500, which comprises a tuition fee of AU$40,000 and a non-tuition fee of AU$6,500.

How long does the Certificate III in Carpentry take to complete?

The course has a duration of 101 weeks.

Where is the Certificate III in Carpentry delivered?

The course is delivered at George Brown College, located at Level 5, 191-199 Thomas Street, Haymarket NSW 2000, which operates as an arrangement with a non-registered provider under Captain Cook Institute Pty Ltd (CRICOS Provider Code: 03208D).

What is the CRICOS course code and national VET code for this qualification?

The CRICOS course code is 119936H and the VET National Code is CPC30220.

Is this course in the field of architecture and building?

Yes, the Certificate III in Carpentry falls under the broad field of Architecture and Building (04), with a narrow field of Building (0403) and a detailed field of Carpentry and Joinery (040311).

Application

How to Apply

Three simple steps to get enrolled

Step 01

Enquire

Click "Enquire Now" and tell us a little about yourself. It's free and takes 2 minutes.

Step 02

Submit Documents

Our team will guide you on exactly which documents to prepare and submit.

Step 03

Get Enrolled

Receive your offer letter and confirm your enrolment. Welcome to the course!

Course Snapshot

Salary, careers & skills

Typical Salary

Entry-level / Apprentice (0-2 years)AUD $38,000 to $55,000 per year

Early Career / Newly Qualified (2-5 years)AUD $55,000 to $75,000 per year

Mid-Level / Experienced Tradesperson (5-10 years)AUD $75,000 to $95,000 per year

Career Paths

Residential CarpenterCommercial CarpenterFormwork CarpenterFraming CarpenterFinish / Joinery Carpenter

Key Skills

Reading and interpreting technical drawings, blueprints, and building plansTimber framing, wall construction, and structural assemblyRoof framing, truss erection, and cladding installationFlooring, staircase, and door and window installationUse and maintenance of hand tools, power tools, and equipment

Full Course Overview

💬

Need guidance?

Free advisor support

Our advisors help international students choose the right course and navigate visa pathways — at no cost.

Promote your Institution with Find the Courses