Course Overview

About This Course

The Certificate III in Solid Plastering (CPC31020, CRICOS 116816G) is delivered by Greenhill Institute Pty Ltd at its Brunswick, Victoria campus, combining face-to-face classroom theory with practical training on campus and access to a simulated environment.

The qualification provides a trade outcome in solid plastering for residential and commercial work. It covers core skills common to the construction industry as well as the specialist field of solid plastering, where students learn to apply plaster, cement and other mixtures to walls to create smooth or decorative finishes to interior walls and render exterior walls.

The course runs over 56 weeks (including holiday breaks), with a total volume of learning of 1,220 hours and a minimum requirement of 20 scheduled course contact hours per week.

Students complete 20 units of competency: 15 core units covering WHS in construction, levelling, restricted-height scaffolding, workplace communication, measurements/calculations, reading plans, and the core solid plastering skills (handling materials, using tools and equipment, surface preparation, float/render application, set coats, trowelled texture finishes and restoration work), plus 5 elective units in concreting, working at heights, elevated work platforms, trestle/plank systems and costing construction work.

Graduates may progress to CPC50220 Diploma of Building and Construction (Building). Total course fees are AU$30,500, comprising AU$25,000 in tuition and AU$5,500 in non-tuition fees.

Where You Can Study

Available Locations

Melbourne

Suite 2 - 17 David St, BRUNSWICK, VIC 3056

Open in Maps ↗

Student Information

Fees & Entry by Student Type

Tuition Fee

AU$25,000

Duration

56 Weeks

Study Mode

Minimum 20 scheduled course contact hours per week

Entry Requirements

Applicants must be at least 18 years of age at the time of application.
A Pre-Training Review (PTR) is completed before enrolment to assess the applicant’s existing competencies, support needs, English level and oral communication skills.
International students (on-shore or off-shore) require a minimum IELTS score of 6.0 (or equivalent) for direct entry into the VET course, OR IELTS 5.5 with up to 10 weeks of ELICOS beforehand, OR IELTS 5.0 with up to 20 weeks of ELICOS beforehand, OR an Oxford Placement Test score of 61 or higher. Test results must be no more than two years old.
Mature-age applicants who do not meet the standard entry requirements may be considered on the basis of at least 2 years’ relevant work experience (supported by a reference letter, work samples and CV), subject to individual assessment and possible Recognition of Prior Learning (RPL).
A Language, Literacy, Numeracy and Digital (LLND) test is completed prior to commencement; students identified as needing extra support are offered internal and/or external assistance.
Basic computer literacy is required; support is provided for students who do not already have it.
Students must have access to a laptop or computer (Windows 7 or later), the internet, Microsoft Office and an active email address, and be contactable by phone.

Eligibility

Entry Requirements

General Requirements

Applicants must be at least 18 years of age at the time of application.
A Pre-Training Review (PTR) is completed before enrolment to assess the applicant’s existing competencies, support needs, English level and oral communication skills.
International students (on-shore or off-shore) require a minimum IELTS score of 6.0 (or equivalent) for direct entry into the VET course, OR IELTS 5.5 with up to 10 weeks of ELICOS beforehand, OR IELTS 5.0 with up to 20 weeks of ELICOS beforehand, OR an Oxford Placement Test score of 61 or higher. Test results must be no more than two years old.
Mature-age applicants who do not meet the standard entry requirements may be considered on the basis of at least 2 years’ relevant work experience (supported by a reference letter, work samples and CV), subject to individual assessment and possible Recognition of Prior Learning (RPL).
A Language, Literacy, Numeracy and Digital (LLND) test is completed prior to commencement; students identified as needing extra support are offered internal and/or external assistance.
Basic computer literacy is required; support is provided for students who do not already have it.
Students must have access to a laptop or computer (Windows 7 or later), the internet, Microsoft Office and an active email address, and be contactable by phone.

Career & Study Pathways

Where this takes you

Career Opportunities

Solid Plasterer
Renderer

Quality & Recognition

Accreditation & Migration

Academic Regulator

ASQA

Accreditation Status

Accredited

Course Content

Units of Competency

All Units20 units

CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

Core unit

CPCCCM2006

Apply basic levelling procedures

Core unit

CPCCCM2008

Erect and dismantle restricted height scaffolding

Core unit

CPCCOM1012

Work effectively and sustainably in the construction industry

Core unit

CPCCOM1013

Plan and organise work

Core unit

CPCCOM1014

Conduct workplace communication

Core unit

CPCCOM1015

Carry out measurements and calculations

Core unit

CPCCOM2001

Read and interpret plans and specifications

Core unit

CPCCSP2001

Handle solid plastering materials

Core unit

CPCCSP2002

Use solid plastering tools and equipment

Core unit

CPCCSP2003

Prepare surfaces for plastering

Core unit

CPCCSP3001

Apply float and render to straight and curved surfaces

Core unit

CPCCSP3002

Apply set coats

Core unit

CPCCSP3003

Apply trowelled texture coat finishes

Core unit

CPCCSP3004

Restore and renovate solid plasterwork

Core unit

CPCCCO2013

Carry out concreting to simple forms

Elective unit

CPCCCM2012

Work safely at heights

Elective unit

CPCCCM3001

Operate elevated work platforms up to 11 metres

Elective unit

CPCCPB3026

Erect and maintain trestle and plank systems

Elective unit

CPCCCM3005

Calculate costs of construction work

Elective unit

Common Questions

Frequently Asked Questions

What is the total cost of the Certificate III in Solid Plastering at Greenhill Institute?

The estimated total course cost is AU$30,500, which comprises a tuition fee of AU$25,000 and a non-tuition fee of AU$5,500.

How long does the Certificate III in Solid Plastering take to complete?

The course has a duration of 56 weeks and is delivered at the Greenhill Institute campus in Brunswick, Victoria.

What is the CRICOS code for the Certificate III in Solid Plastering at Greenhill Institute?

The CRICOS course code is 116816G and the VET National Code is CPC31020.

Where is the Certificate III in Solid Plastering delivered?

The course is delivered at Greenhill Institute Pty Ltd's campus located at Suite 2 - 17 David St, Brunswick, VIC 3056. The location is owned and operated by the provider.

Does this course include a work component or foundation studies?

No, the Certificate III in Solid Plastering at Greenhill Institute does not include a work component or foundation studies. The course is taught in English.

Application

How to Apply

Three simple steps to get enrolled

Step 01

Enquire

Click "Enquire Now" and tell us a little about yourself. It's free and takes 2 minutes.

Step 02

Submit Documents

Our team will guide you on exactly which documents to prepare and submit.

Step 03

Get Enrolled

Receive your offer letter and confirm your enrolment. Welcome to the course!

Course Snapshot

Salary, careers & skills

Typical Salary

Entry-level (0-2 years)AUD $43,000 to $65,000 per year

Early Career (2-5 years)AUD $65,000 to $80,000 per year

Mid-Level (5-10 years)AUD $80,000 to $95,000 per year

Career Paths

Solid PlastererRenderer / Render TechnicianFibrous PlastererHeritage Plastering SpecialistCommercial Plasterer

Key Skills

Preparing and cleaning wall and ceiling surfaces for plasteringMixing and handling solid plastering materials including cement, lime, and acrylic productsApplying float and render to straight and curved surfacesApplying decorative and textured plaster finishesInstalling pre-moulded and paper-faced cornices

Full Course Overview

💬

Need guidance?

Free advisor support

Our advisors help international students choose the right course and navigate visa pathways — at no cost.

Promote your Institution with Find the Courses

Promote your Institution with Find the Courses

Certificate III in Solid Plastering

About This Course

Available Locations

Fees & Entry by Student Type

Entry Requirements

Where this takes you

Accreditation & Migration

Units of Competency

Frequently Asked Questions

How to Apply

Hear From the Students